Limited asymptomatic carriage of Pneumocystis jiroveci in human immunodeficiency virus-infected patients

Forty-seven bronchoalveolar lavage fluid samples from 16 human immunodeficiency virus (HIV)-infected patients were used to test the latency model of Pneumocystis infection in the human host. Identification of DNA sequence polymorphisms at 4 independent loci were used to genotype Pneumocystis jiroveci from the 35 samples that contained detectable P. jiroveci DNA. Eighteen of those 35 samples came from patients who did not have Pneumocystis pneumonia (PCP) and had confirmed alternative diagnoses. Seven patients had asymptomatic carriage of P. jiroveci over periods of less than or equal to9.5 months after an episode of PCP, and in all 7 cases, a change in genotype from that in the original episode of PCP was observed. The absence of P. jiroveci DNA in one-fourth of the 47 samples and the observed changes in genotype during asymptomatic carriage do not support the latency model of infection. Asymptomatic carriage in HIV-infected patients may play a role in transmission of P. jiroveci and may even supply a reservoir for future infections

Active Sports Tourism. Active Sports Tourists Competing In The 2011 MBNA Chester Marathon

Sports tourism has received increasing attention in the academic literature of late, as well as from the industry by tourism suppliers, event organisers and destination managers. This niche market is growing in size and encompasses a wide range of tourism experiences, from taking part in sporting holidays through to spectating at sporting events. The phenomena of mass participation in sport and tourism would seem to be closely related, with sport and tourism activity increasingly taking place simultaneously. This case study seeks to add further depth to the consideration of this vibrant sector of the tourism industry by focusing upon the active sports tourist. Data collected from runners at the MBNA Chester Marathon who had at least one overnight stay is presented and then placed within the broader context of sports tourism, active sports tourism and destination marathons

Computational study of human head response to primary blast waves of five levels from three directions

Human exposure to blast waves without any fragment impacts can still result in primary blast-induced traumatic brain injury (bTBI). To investigate the mechanical response of human brain to primary blast waves and to identify the injury mechanisms of bTBI, a three-dimensional finite element head model consisting of the scalp, skull, cerebrospinal fluid, nasal cavity, and brain was developed from the imaging data set of a human female. The finite element head model was partially validated and was subjected to the blast waves of five blast intensities from the anterior, right lateral, and posterior directions at a stand-off distance of one meter from the detonation center. Simulation results show that the blast wave directly transmits into the head and causes a pressure wave propagating through the brain tissue. Intracranial pressure (ICP) is predicted to have the highest magnitude from a posterior blast wave in comparison with a blast wave from any of the other two directions with same blast intensity. The brain model predicts higher positive pressure at the site proximal to blast wave than that at the distal site. The intracranial pressure wave invariably travels into the posterior fossa and vertebral column, causing high pressures in these regions. The severities of cerebral contusions at different cerebral locations are estimated using an ICP based injury criterion. Von Mises stress prevails in the cortex with a much higher magnitude than in the internal parenchyma. According to an axonal injury criterion based on von Mises stress, axonal injury is not predicted to be a cause of primary brain injury from blasts. Copyright

The 'At-risk mental state' for psychosis in adolescents : clinical presentation, transition and remission.

Despite increased efforts over the last decade to prospectively identify individuals at ultra-high risk of developing a psychotic illness, limited attention has been specifically directed towards adolescent populations (<18 years). In order to evaluate how those under 18 fulfilling the operationalised criteria for an At-Risk Mental State (ARMS) present and fare over time, we conducted an observational study. Participants (N = 30) generally reported a high degree of functional disability and frequent and distressing perceptual disturbance, mainly in the form of auditory hallucinations. Seventy percent (21/30) were found to fulfil the criteria for a co-morbid ICD-10 listed mental health disorder, with mood (affective; 13/30) disorders being most prevalent. Overall transition rates to psychosis were low at 24 months follow-up (2/28; 7.1 %) whilst many participants demonstrated a significant reduction in psychotic-like symptoms. The generalisation of these findings may be limited due to the small sample size and require replication in a larger sample

A three dimensional model of the photosynthetic membranes of Ectothiorhodospira halochloris

The three dimensional organization of the complete photosynthetic apparatus of the extremely halophilic, bacteriochlorophyll b containing Ectothiorhodospira halochloris has been elaborated by several techniques of electron microscopy. Essentially all thylakoidal sacs are disc shaped and connected to the cytoplasmic membrane by small membraneous ldquobridgesrdquo. In sum, the lumina of all thylakoids (intrathylakoidal space) form one common periplasmic space. Thin sections confirm a paracrystalline arrangement of the photosynthetic complexes in situ. The ontogenic development of the photosynthetic apparatus is discussed based on a structural model derived from serial thin sections

Transport J<inf>c</inf> in Bulk Superconductors: A Practical Approach?

The characterisation of the critical current density of bulk high temperature superconductors is typically performed using magnetometry, which involves numerous assumptions including, significantly, that Jc within the sample is uniform. Unfortunately, magnetometry is particularly challenging to apply where a local measurement of Jc across a feature, such as a grain boundary, is desired. Although transport measurements appear to be an attractive alternative to magnetization, it is extremely challenging to reduce the cross-sectional area of a bulk sample sufficiently to achieve a sufficiently low critical current that can be generated by a practical current source. In the work described here, we present a technique that enables transport measurements to be performed on sections of bulk superconductors. Metallographic techniques and resin reinforcement were used to create an I-shaped sample of bulk superconductor from a section of Gd-Ba-Cu-O containing 15 wt % Ag2O. The resulting superconducting track had a cross-sectional area of 0.44 mm2. The sample was found to support a critical current of 110 A using a field criterion in the narrowed track region of 1 μV cm-1. We conclude, therefore, that it is possible to measure critical current densities in excess of 2.5 x 108 A m-2 in sections of a bulk superconductor.This work was supported by the Engineering and Physical Sciences Research Council, via a Doctoral Training Award (grant number is EP/L504920/1) and funding from grant number EP/K02910X/1. This work was also supported by the Boeing Company. All data are provided in full in the results section of this paper.This is the author accepted manuscript. The final version is available from IEEE via http://dx.doi.org/10.1109/TASC.2016.253764

A new high: Cannabis as a budding source of carbon-based materials for electrochemical power sources

Cannabis sativa L., a low-cost, fast-growing herbaceous plant, is seeing a resurgence in widespread cultivation as a result of new policies and product drive. Its biodegradable and environmentally benign nature coupled with its high specific surface area and three-dimensional hierarchal structure makes it an excellent candidate for use as a biomass-derived carbon material for electrochemical power sources. It is proposed that this ‘wonder crop’ could have an important role in the energy transition by providing high-functioning carbon-based materials for electrochemistry. In this article, all instances of C. sativa usage in batteries, fuel cells and supercapacitors are discussed with a focus on highlighting the high capacity, rate capability, capacitance, current density and half-wave potential that can be achieved with its utilisation in the field

Neutron studies of Na-ion battery materials

The relative vast abundance and more equitable global distribution of terrestrial sodium makes sodium-ion batteries (NIBs) potentially cheaper and more sustainable alternatives to commercial lithium-ion batteries (LIBs). However, the practical capacities and cycle lives of NIBs at present do not match those of LIBs and have therefore hindered their progress to commercialisation. The present drawback of NIB technology stems largely from the electrode materials and their associated Na+ion storage mechanisms. Increased understanding of the electrochemical storage mechanisms and kinetics is therefore vital for the development of current and novel materials to realise the commercial NIB. In contrast to x-ray techniques, the non-dependency of neutron scattering on the atomic number of elements (Z) can substantially increase the scattering contrast of small elements such as sodium and carbon, making neutron techniques powerful for the investigation of NIB electrode materials. Moreover, neutrons are far more penetrating which enables more complex sample environments including in situ and operando studies. Here, we introduce the theory of, and review the use of, neutron diffraction and quasi-elastic neutron scattering, to investigate the structural and dynamic properties of electrode and electrolyte materials for NIBs. To improve our understanding of the actual sodium storage mechanisms and identify intermediate stages during charge/discharge, ex situ, in situ, and operando neutron experiments are required. However, to date there are few studies where operando experiments are conducted during electrochemical cycling. This highlights an opportunity for research to elucidate the operating mechanisms within NIB materials that are under much debate at present

Negative parental responses to coming out and family functioning in a sample of lesbian and gay young adults

Parental responses to youths' coming out (CO) are crucial to the subsequent adjustment of children and family. The present study investigated the negative parental reaction to the disclosure of same-sex attraction and the differences between maternal and paternal responses, as reported by their homosexual daughters and sons. Participants' perceptions of their parents' reactions (evaluated through the Perceived Parental Reactions Scale, PPRS), age at coming out, gender, parental political orientation, and religiosity involvement, the family functioning (assessed through the Family Adaptability and Cohesion Evaluation Scales, FACES IV), were assessed in 164 Italian gay and lesbian young adults. Pearson correlation coefficients were calculated to assess the relation between family functioning and parental reaction to CO. The paired sample t-test was used to compare mothers and fathers' scores on the PPRS. Hierarchical multiple regression was conducted to analyze the relevance of each variable. No differences were found between mothers and fathers in their reaction to the disclosure. The analysis showed that a negative reaction to coming out was predicted by parents' right-wing political conservatism, strong religious beliefs, and higher scores in the scales Rigid and Enmeshed. Findings confirm that a negative parental reaction is the result of poor family resources to face a stressful situation and a strong belief in traditional values. These results have important implications in both clinical and social fields